Every exterior washing job is managed directly by Ivan Petrov without subcontractor handoffs.
Power Washing Pros is not an online lead brokerage or a franchisee network. The owner-operator who quotes your commercial facade or residential driveway is the technician who sets nozzle angles and meters chemical ratios on site.
The business operates under the registered entity LLC POWER WASHING PROS, based out of 614 SUMMERWOOD DRIVE, NEW BRAUNFELS, TX 78130, NEW BRAUNFELS, TX, United States. Ivan Petrov has worked as a dedicated exterior cleaning specialist in exterior building and surface pressure washing since 2018, logging 47 completed properties across Comal County and neighbouring South Texas municipal districts.
Work is executed under complete commercial general liability insurance coverage, protecting client physical infrastructure, perimeter landscaping, and window seals from thermal or pressure impact. We do not dispatch casual day labour. Every surface receives a calculated treatment protocol tailored to substrate hardness and biological depth.
Dual-regime surface cleaning engineered for Texas limestone and flatwork.
A standard 4000 PSI pressure washer ruins architectural brick and strips stucco coating. We deploy separated mechanical circuits: a low-pressure chemical soft washing system for vertical facades and roof tiles, and an industrial rotary wash loop for cured flat concrete.
| Rig Assembly Component | Operating Rating | Chemical & Pressure Modulation | Substrate Application Target |
|---|---|---|---|
| Dedicated Soft Wash Circuit | 60 to 100 PSI delivery | Metered sodium hypochlorite (1.0%–4.0%) with surfactant buffer | Texas limestone, dryvit, stucco, siding, asphalt shingles |
| Rotary Surface Flatwork Unit | 1500 to 3500 PSI variable | Dual 2502 spray tips on 20-inch balanced stainless rotating bar | Poured concrete driveways, aggregate walkways, parking bays |
| Chemical Proportioner Manifold | Precision 3-valve dial | On-the-fly dilution calibration without bulk pre-mixing waste | Targeted efflorescence extraction, mold root eradication |
| High-Volume Water Supply Line | 3/4-inch heavy duty feed | Buffer tank isolation preventing residential pump cavitation | Consistent uninterrupted nozzle volume during continuous runs |
| Thermal Hot Water Delivery | Up to 200°F burner loop | Emulsifies petroleum and grease crusts without chemical excess | Commercial driveway oil stain removal and restaurant pads |
We inspect masonry porosity, substrate age, building height, run length, and drainage pathways prior to pressurising any line. Facade washing rates range predictably between $0.10 and $0.80 per square foot based on contaminant density, staging requirements, and substrate type. Written estimates are delivered within 24 hours at zero charge.
If a structure has failed mortar joints, delaminating elastomeric paint, or hairline cracking in structural masonry, we document those pre-existing faults with the property owner before treatment. We will not use high pressure on fragile Austin stone or dryvit under any circumstances.
Speak directly with Ivan Petrov regarding your exterior wash scope.
Property managers, commercial facility directors, and Comal County homeowners deal with the technician directly. Proposals are presented as fixed project contracts, never variable hourly tickets.
Direct field line. Answered during daytime operational hours. Leave address and requirements for immediate callback.
Send facade plans, address, and exterior photographs. Detailed written quote dispatched within 24 hours.
NEW BRAUNFELS, TX 78130, United States. Service rigs dispatched directly across New Braunfels and Comal County.